- Drill Bit[10]
- Contact Person : Ms. Yan Deillu
- Company Name : Chengdu Wolfni Technology Co., Ltd.
- Tel : 86-028-88431008
- Fax : 86-028-88456435
- Address : Sichuan,Chengdu,South Extension, Six Road East,Longquan
- Country/Region : China
- Zip : 610100
new water well drilling bit
new water well drilling bit
1.This is our latest product.
2.Cutting structure is force balanced and bit blade is asymmetrically designed
so that the load on bit is balanced that resulting better stability of the bit.
3.Profile with medium-heavy cutter density can obtain better ROP.
4.Main cutters are high performance PDC cutters to insure service life of the bit
while improving ROP.
5.Hydraulic system of the bit is optimized using dynamic flow pattern simulation
technology to enhance cleaning and cooling effects of the bit to effectively
prevent bit from balling.
6.Shock absorbers are designed to make the bit capable of drilling through
formations with hard stringers.
7.Cutters exposure is optimized to insure the bit can achieve higher ROP with
soft to medium formations.
8.PDC water well drilling bit
9.Certified by ISO9001:2008
Drill Parameters | |||
Size | Hydraulic Flow Rate | Rotation Speed | Weight on Bit |
Inch | gpm | rpm | lbs |
6" | 200~350 | 80~380 | 2,000~15,000 |
8 1/2" | 300~500 | 60~350 | 3,000~11,000 |
9 7/8" | 400~600 | 60~350 | 4,000~20,000 |
12 1/4" | 550~850 | 60~350 | 4,000~14,000 |
17 1/2" | 950~1,450 | 60~240 | 5,000~24,000 |
Operating Parameters | |||||
Size | Blades | Nozzles | Primary Cutter Size | Guge | API Pin Connection |
Inch | mm | Inch | Inch | ||
6" | 3~6 | 4~7 | Φ13 | 1.5"~2.5" | 3 1/2" API Reg |
8 1/2" | 3~6 | 4~7 | Φ19 Φ16 Φ13 | 2"~3" | 4 1/2" API Reg |
8 3/8" | 3~6 | 4~7 | Φ19 Φ16 Φ13 | 2"~3" | 4 1/2" API Reg |
9 1/2" | 3~7 | 4~10 | Φ19 Φ16 Φ13 | 2"~3" | 6 5/8" API Reg |
9 7/8" | 3~7 | 4~10 | Φ19 Φ16 Φ13 | 2.5"~3.5" | 6 5/8" API Reg |
12 1/4" | 3~7 | 4~10 | Φ19 Φ16 Φ13 | 2.5"~3.5" | 6 5/8" API Reg |
17 1/2" | 3~7 | 4~10 | Φ19 Φ16 Φ13 | 3.5"~5.5" | 7 5/8" API Reg |
Formation Guide | ||||
Formation | IADC | Formation | Rock Type | Formation |
Very soft | 1 | Ultra soft formations with low compressive strength and sticky layers | Gumbo, Clay, Marl | 1~2 |
Soft | 2 | Soft formation with low strength and high drillability | Clay, Salt, Anhydrite, Shale | 2~3 |
Soft to Medium | 3 | Soft to medium formations with low compressive strength | Sand, Shale, Chalk | 2~4 |
Medium to Hard | 4~6 | Medium to hard formations with high compressive strength and low abrasiveness | Shale, Limestone, Mudstone,Sandstone | 3~5 |
Hard | 7 | Hard and dense non-abrasive formations with high compressive strength | Shale, Limestone, Dolomite, Anhydrite | 4~6 |
Hard,dense and abrasive formations with ultra-high compressive strength | Siltstone, Sandstone, Mudstone | 6~8 | ||
Extremely Hard | 8 | Ultra hard and abrasive formations | Quartzite, Lgneous rock | ≥8 |
Similar products you may like:
Please kindly specify the following
information while inquiring:
1.Strata
2.Application
3.Drilling depth
4.Quantity
5.Other requirements on thechnical
new water well drilling bit